VRX   

 

Up

 

 

 

 

 

 

 

 

 

 


VRX - Quarter round in the X-series
• Air Volumes 30-400 l/s
(108-1440 m³/h).
• Easy adjustable adjacent zone
• Easy to install and commission
• Test nipple for measuring the air flow rate
• Maintenance free

 
Function
The
X-Series Displacement Terminal provide a completely new method of using Displacement Ventilation. The patented X-series nozzle has been designed using 20 years of experience in the design and the use of Displacement Terminals. They provide the following advantages:
Air direction from the panel can be changed without the use of any tools or technical expertise. When the direction is modified, the air is still supplied equally over the entire surface of the panel and the pressure characteristic remains the same over time.
A main consideration in the use of Displacement Terminals with low supply air temperature is the low floor
temperature which can be created
in a poorly designed system.

 
Due to the higher level of a mix created by the X-Series nozzle, lower air supply temperatures may be used and consequently the Displacement Ventilation performs with higher load factors.

Construction/Design
The
X-series are designed for multiple use. Built around aluminium profiles the unit may rapidly be installed and easily dismounted, would the internal duct cleaning be required. A shaped edge takes away the uneven line normally created between the wall/ceiling and the panel. With it's very rigid construction, damage is highly unlikely but would it occur it is a simply measure to change any section of the unit. Standard panel length is 2 metres with the facility for a duct cover to fit for example between the side of the panel and the wall.

- Front and rear: Steel
- Corner profiles: Aluminium
- X-Nozzles: ABS plastic
- Front thickness 1,0 mm.
- Standard finish is white (RAL9010).
Alternative design
- Special design for ceiling.
- Other types of X-Series are available:
RVX is a shallow bow shaped panel, wall model.
RAX is a half round wall model.
 
Customise/calculate

The diffuser can be customized in terms of the dimensions, air flow, connection size etc.


Customise/calculate: VRX