Floor Panels

FLOOR PANEL 4GF1C
4 Guillotined Edges, 1 Coverplate

4GF1C

NOTES
Panel faceplate to be 14 SWG stainless steel, matt polished.

Timber grounds by others.

Panels insulated with 50mm glass fibre class 'o' backed mattress.

Panels drilled at approximately 300mm centres for fixing with No.7 countersunk stainless steel wood screws.

Connections are 15mm, 20mm or 25mm BSP sockets.

All edges guillotined.

Cover plate manufactured to site dimensions (TSD) after panels are fixed.

Panels tested to 700 kPa at works.

Panel mass is approximately 40 kg/m2.

Air vents concealed beneath cover plate.

Designed primarily for the perimeter of office buildings, Solray Floor Panels offer a strong, attractive solution to heating requirements. The panel offers clients the heating outputs they desire without sacrificing lettable space whilst retaining a clear view through any full height glazing facades.

Solray Floor Panels are normally constructed from stainless steel faceplates or other non-ferrous materials, with a steel waterway grid for added strength.

Panels are supplied in natural finishes and therefore do not require paint application. They can also be supplied with an embossed facia plate to give additional decorative finishes.